fbpx





Series 1600Low Temperature Boiler

The Series 1600 is a complete UL listed package that is a ready-to-install system featuring a perfectly matched powerful and efficient burner/boiler combination.

Series 1600 Low Temperature Boiler can burn:
Natural Gas, Propane, #2 Oil, Dual Fuel

Support Documents

Boiler Information

CAD Drawings

Contact Sales

Features

  • Burner and Boiler are a UL listed package.
  • UL Listed Gas Trains and Control Systems.
  • Choice of Power Burners.
  • Main and Auxiliary Gas Valves
  • Air Flow Switch
  • Flame Safeguard
  • Manual Main, Leak Test, and Pilot Gas Shutoff Valves
  • Bell and Gossett Circulating Pump
  • Honeywell Aquastat Relay
  • Automatic Low Water Cutoff
  • Honeywell Second High-Limit With Manual Reset.
  • Burner Control Relay.
  • High Visibility Operating Light.
  • Pressure/Temperature Gauge
  • Pressure Relief Valve
  • 2″ Diameter Firetubes of SA178-A Steel
  • Turbulators for Maximum Heat Transfer
  • Rail Legs
  • Lifting Lugs
  • 1.5 Inches of Insulation With a Painted Steel Jacket.

All necessary hot water boiler controls and secondary plumbing are in place and pre wired, and the vessels easily fit through a three foot wide doorway, resulting in a very quick start-up. Firing rates are available from 1100MBTU to 1700MBTU. However, many millions of BTU’s can be delivered by creating an efficient, fully modular system of many vessels operated by our control panel.

Standard features include nationally known parts and controls that are quickly available at most supply houses, allowing for easy quick and easy repair and maintenance, which can dramatically reduce down time.

Options

Superior Boiler offers many options:

  • Choice of burner manufacturers fired by natural gas, oil, propane, or combination fuel.
  • Spark Ignition System for Combination Fuel Burners
  • Low-High-Low and Modulating gas trains
  • CSD-1, IRI, FM
  • Low-High-Low and Modulating Gas Trains with Motorized Valves
  • Fan-Damper relays
  • Louver Box for Sealed Combustion Side-Wall Venting
  • Barometric Dampers and Galvanized Tees
  • Extra Clean-out Openings and Plugs
  • Microprocessor Control Panel
  • Factory built Primary Mains and Headers
  • Immersion Aquastats
  • Various Relief Valve sizes for different applications

Design

The Series 1600 Domestic Hot Water Boiler is manufactured to exceed ASME Section IV standards and typically is used to provide supply temperatures from the coil of between 140-180°F, yet can accept extremely low return temperatures (well below 100°F) without shocking the boiler.  The temperature of the coil water is impacted by the temperature of the Space Heating side because the coil is immersed in that water. These vessels feature 70 vertical firetubes, each of which is 2″ diameter, 12 gauge steel and fitted with a high-efficiency turbulator for maximum heat transfer. The combustion chamber is fully water-backed, with burners that are UL listed.

Safety

A well-made, rugged vessel is naturally a safer. Superior Boiler Domestic Hot Water Boilers also have a firebox design that is completely backed by water, along with safety controls on the boiler that results in a very safe and secure package.

5/5 (1 Review)

Series 1600 Low Temperature Boiler Drawings

Boiler Efficiencies

Series 1600 Low Temperature Boilers
Model
Input (BTU/Hr)
Gross OutPut
Combustion Efficiency
GPM @ Riseº F
1600
1,400,000
1,162,800
83.0%
35.0 @ 50°F
1600
1,500,000
1,245,000
83.0%
35.0 @ 50°F
1600
1,600,000
1,328,000
83.0%
35.0 @ 50°F
1600
1,700,000
1,411,000
83.0%
35.0 @ 50°F